Headlights
After some initial work on the installation of the hinge kit on the bonnet, we turned our attention to the headlights. The assembly of the headlight components, mounting the headlights to the bonnet, and the switch to LEDs from halogen bulbs has been previously addressed in two separate posts, so we won’t go into much detail on the process as we mount the headlights to the painted bonnet. See the headlight fitting post here: https://valvechatter.com/?p=14074
Information about the conversion to LED lights throughout the car may be found here: https://valvechatter.com/?p=14188
Front Flashers/Turn Indicators
Mounting the flasher units to the bonnet is pretty straightforward although installing the beehive glass and the chrome trim ring into the rubber boot can be a test of one’s patience, but that is what it takes – lots of patience. Before installing the light assembly we installed three spire nuts at each light mounting point. We used new nuts and they pushed on easily. Three stainless steel #6 Phillips sheet metal screws are used for each light.
Bugeye Restoration Video Episode Eighty-eight shows the installation of the headlights and flashers/turn indicators: