Bonnet Wiring Harness and Lights Removal

My car has been modified to convert the bonnet from the original hinge at the rear, opening from the front, to a front hinge opening at the rear. This is a common modification and it does offer much greater and easier access to the engine and other under-bonnet components. I want to be able to quickly and completely remove the bonnet from the car if the need arises and this means that the wiring harness that services the electrical needs of the front of the car must provide for an electrical connector joining the primary system to the bonnet.

The bonnet includes the LH and RH combined side and flasher lights, the LH and RH main beam headlight, and the LH and RH high beam headlight. 

Video Episode Thirty-nine details the removal of the wiring harness and the lights:

https://vimeo.com/817788749/594dff6323

Episode Thirty-nine includes the following content:

0:00 – Removing the bonnet electrics

0:40 – Wiring harness splice with connector

0:50 – Harness routing in the bonnet

1:27 – RH sidelight/flasher removal

2:00 – Headlight components and trim ring fixing

3:00 – Headlight plug to bulb

3:37 – Headlight bucket and seal removal

3:59 – Headlight alignment adjusters

4:58 – Harness routing

5:07 – LH side light and flasher

5:32 – Wiring harness removed